Traditional Sliding Bolt
with an Innovative Twist!

Live Chat Support Software
 

 

 

Using the Slide Bolt
Combi-Bolt

Changing Your Combination

Setting the Combi-Bolt slide bolt takes only few seconds. Simple follow the instructions below! We recommend reading all the steps once before starting.  There are two instructions below, one for prior version and the new version introduced in late 2013 with the built-in set screw on the slide bolt.

 

Instructions of new version of the Combi-Bolt slide bolt after 2013:

  • Step 1. Determine your new code for the slide bolt before starting to change the combination. Writing down the code and storing it someplace safe is always a good idea with combination devices.
  • Step 2. Hold the Combi-Bolt slide bolt in your hand with the handle on the right side and the slide bolt on the left.
  • Step 2. Set the dials to the current combination. Note: All Combi-Bolt slide bolts are manufactured with their combination set to 0-0-0-0.
  • Step 3. To initiate the change, loosen the screw on the handle face, lift the handle up and then slide it back completely. The finger grip will slide down into a notch when it is all the way back. Tighten the handle screw back down. The Combi-Bolt slide bolt is now in change mode.
  • Step 4. Turn the dials to your new combination.
  • Step 5. Loosen the handle screw, lift the slide bolt up and then slide the bolt forward completely.   Tighten the slide bolt change screw back down.  Note: The Combi-Bolt is now out of change mode. The combination on the dials is now the current code.

 

 

Instructions of prior version of the Combi-Bolt slide bolt before 2014:

  • Step 1. Determine your new code before starting to change the combination. Writing down the code and storing it someplace safe is always a good idea with combination devices.
  • Step 2. Hold the Combi-Bolt slide bolt in your hand with the handle on the right side and the slide bolt on the left.
  • Step 2. Set the dials to the current combination. Note: All Combi-Bolt slide bolts are manufactured with their combination set to 0-0-0-0.
  • Step 3. To initiate the change, first lift the slide bolt up and then slide it back completely. The finger grip will slide down into a notch when it is all the way back. The Combi-Bolt is now in change mode.
  • Step 4. Turn the dials to your new combination for the slide bolt.
  • Step 5. Lift the slide bolt up and then slide the bolt forward completely. Note: The Combi-Bolt is now out of change mode. The combination on the dials is now the current code.

Related Information

Demo: Easy Installation

slide bolt

 

 

 

 

 

 

slide bolt latch

 

 

 

 

slide bolt

sliding bolt

www.fjmsecurity.com